KeeNetic EXTRA KN-1710, Command Reference Manual

Page: 108 / 354

Prefix no Yes
Change settings Yes
Multiple input Yes
Interface type Bridge
Synopsis
(config-if)>
include
‹
interface
›
(config-if)>
no include
‹
interface
›
Arguments
Description Value Argument
Name or alias of the Ethernet-interface
that should be plugged into the bridge.
Interface
name interface
Example
(config-if)> include WifiStation0
Interface acquired.
History
Version Description
The interface include command has been introduced.
2.00
3.20.39 interface inherit
Description Specify the name of the Ethernet-interface which will be added to the program
bridge as a port. In contrast with the include command, inherit command
transfers some settings of the interface being added to the bridge, such as
IP-address, mask and IP-aliases. On removing either the bridge itself or the
bridge interface, these settings, even if they have been changed will be copied
back to the vacant interface.
The command allows one to add the device control interface to the bridge
so that control is not lost.
Command with no prefix removes the interface from the bridge, returns the
settings that have earlier been inherited by the bridge back to the interface,
and resets these settings on the bridge.
Prefix no Yes
Change settings Yes
Multiple input Yes
Interface type Bridge
Synopsis
(config-if)>
inherit
‹
interface
›
(config-if)>
no inherit
‹
interface
›
Command Reference Guide — Keenetic Extra (KN-1710)
108
Chapter 3 Command Reference