KeeNetic EXTRA KN-1710 Command Reference Manual Download

Page: 33 / 354

Description

Value

Argument

src-port-operator

Operator “less” to compare the

port with the specified

source-port

Operator “equal” to compare the

port with the specified

source-port

Operator “greater” to compare the

port with the specified

source-port

The destination address in the

header of IP-packet.

IP-address

destination

Mask to be applied to the

destination address in the header

IP-mask

destination-mask

of IP-packet before comparison

with

destination

. There are two

ways to enter the mask: in the

canonical form (for example,

255.255.255.0

) and in the form of

prefix with bit length (for example,

/24

Destination port in the

TCP

UDP

header.

Integer

destination-port

The end of the destination range

of ports.

Integer

destination-end-port

dst-port-operator

Operator “less” to compare the

port with the specified

destination-port

Operator “equal” to compare the

port with the specified

destination-port

Operator “greater” to compare the

port with the specified

destination-port

Example

(config-acl)> deny icmp 192.168.0.0

255.255.255.0 192.168.1.1 255.255.255.0

ACL rule added.

History

Version

Description
The access-list deny command has been introduced.

2.00

New value

was added to the

protocol

argument.

2.06

New protocols

esp

gre

and

ipip

were added.

2.08

Port ranges were added.

2.09.A.2.1

Keenetic Extra (KN-1710) — Command Reference Guide

Chapter 3 Command Reference

Summary of Contents for EXTRA KN-1710



































































































































































































































































































































































Search results

Summary of Contents for EXTRA KN-1710

Reviews:

Related manuals for EXTRA KN-1710

Brands by name

Popular brands

KeeNetic EXTRA KN-1710, Command Reference Manual

Search results

Summary of Contents for EXTRA KN-1710

Reviews:

Related manuals for EXTRA KN-1710

Brands by name

Popular brands