KeeNetic EXTRA KN-1710, Command Reference Manual

Page: 119 / 354

Example
(config-if)> ip dhcp client renew
Dhcp::Client: IP address renewed.
History
Version Description
The interface ip dhcp client renew command has been
introduced.
2.03
3.20.55 interface ip dhcp client routes
Description Enable receiving routes from the provider (dhcp options 33, 121, 242). By
default it is enabled. In the configuration it is displayed only with no prefix.
Command with no prefix disables the setting.
Prefix no Yes
Change settings Yes
Multiple input No
Synopsis
(config-if)>
ip dhcp client routes
(config-if)>
no ip dhcp client routes
Example
(config-if)> ip dhcp client routes
Dhcp::Client: ISP DHCP client static routes are enabled.
History
Version Description
The interface ip dhcp client routes command has been
introduced.
2.05
3.20.56 interface ip global
Description Set property “global” with a parameter to the interface. This property is
necessary to configure the default route, DynDNS-Client and NAT functioning.
Can represent global-interfaces as leading to the global network (the Internet).
Property “global”affects the interface priority in setting the default route. The
higher the priority the more desirable it is for the user to access the global
network through the specified interface. Internet access backup (WAN backup)
functionality is using priority “global”.
By default, setting is disabled.
Command with no prefix removes property.
Prefix no Yes
Keenetic Extra (KN-1710) — Command Reference Guide
119
Chapter 3 Command Reference