KeeNetic EXTRA KN-1710, Command Reference Manual

Page: 251 / 354

3.84.11 show interface
Description Show information of specified interface. If you use no argument, the entire
list of all network interfaces will be displayed.
Prefix no No
Change settings No
Multiple input No
Interface type IP
Synopsis
(show)>
interface
‹
name
›
Arguments
Description Value Argument
Full name or an alias of the interface to
display.
Interface
name name
Example
Example 3.1. Review the status of switch ports
The command show interface displays different information depending on
the interface type. In particular, for
FastEthernet0/Vlan1
switch it shows
current state of physical ports, speed and duplex, on top of general
information.
(config)> show interface FastEthernet0/Vlan1
index: 0
type: Switch
description:
state: up
link: up
port, index = 1:
link: up
speed: 100M
duplex: full
port, index = 2:
link: down
speed:
duplex:
port, index = 3:
link: down
speed:
duplex:
port, index = 4:
link: down
speed:
duplex:
port, index = 5:
link: up
Keenetic Extra (KN-1710) — Command Reference Guide
251
Chapter 3 Command Reference