SerialGhost Wi-Fi
Copyright © 2013 KeeLog
3
Introduction
About the product
The
SerialGhost Wi-Fi
is a compact RS-232 and serial bus logger with a memory capacity of
2GB, that may be accessed locally as a USB Flash Drive, or remotely through Wireless LAN.
Bidirectional data flowing through the serial bus will be captured and stored on the internal
Flash Drive in a special file. This data may be retrieved by switching to Flash Drive mode,
giving instant access to all captured data. The Wireless LAN functionality allows receiving
logged data as E-mail reports, and on-demand via the local TCP/IP network. The
SerialGhost
Wi-Fi
also features a built-in time-stamping module and battery. This enables it to add time
and date information to the log file. Thanks to the internal battery, the time and date persist
even when the device is not powered. The
SerialGhost Wi-Fi
does not require any dedicated
software or drivers.
Features
Logs asynchronous serial transmission (RS-232 compatible)
Baud rates up to 115200 bps
Logs 2 streams simultaneously (RX and TX)
2 Gigabytes internal memory
Powered from a USB port, or external power supply
No software or drivers required, Windows, Linux, and Mac compatible
USB Flash Drive mode
Background connection to the Internet over a local Access Point
Automatic E-mail reports with recorded data
On-demand access at any time through TCP/IP
Support for WEP, WPA, and WPA-2 encryption
Time and date stamping
Built-in battery
Requirements
Asynchronous serial bus with RS-232 logic levels (+/-12V)
Operating system with USB Mass-Storage device support
5V DC power source (external power supply, or USB port)
Wi-Fi compliant Access Point coverage (WPA-2, WPA, WEP64/128, or open network)
Optionally
MS Windows XP/Vista/7/8
(only for running
KL Tools
)
