SerialGhost Wi-Fi
Copyright © 2013 KeeLog
24
Configuration files
The
SerialGhost Wi-Fi
is configured via three text files placed on the internal Flash Drive:
CONFIG.TXT
(configures serial bus parameters)
TIME.TXT
(configures the internal clock for time-stamping)
WIFI.TXT
(configures Wi-Fi functionality)
These files should contain configuration parameters, placed in successive lines in the
following format:
Parameter1=Value
Parameter2=Value
Parameter3=Value
…
Example of WIFI.TXT
WiFiNetwork=MyNetwork
WiFiPassword=MyPassword
WiFiEncryption=WPA2
[email protected]
These configuration files must be placed in the device internal memory using Flash Drive
mode.
Device configuration can be performed by
KL Tools
, or manually by the user.
KL Tools
performs the same operation as would be done manually, that is creates the configuration
files, requests switching to Flash Drive mode, and copies the files to the flash disk.
Creating configuration files manually may be necessary on systems not supported by
KL
Tools
, such as
Mac OS
or
Linux
.
