SerialGhost Wi-Fi
Copyright © 2013 KeeLog
6
Step 4.
To start logging, connect the logger in-line on a serial bus, powering the device
through the mini USB port.
The device may be powered from a standard USB port.
Do not
use the red USB key.
Alternatively, an external
+5V DC
(min. 200 mA) power supply may be used to power the
device through the mini-USB port (cell phone chargers with USB connectors are well suited
for this).
Step 5.
To retrieve the logged data,
enable Flash Drive mode using the red USB Key
, just
like in step 2. A removable drive will pop-up, containing the file LOG.TXT with recorded data.
The upstream data (TX) and downstream data (RX) will be differentiated by the markers [1]
and [2] interleaved in the log file.
