Kedacom IPC427-D020-N User Manual Download Page 7

Page: 7 / 53

HD IR Dome Camera

User Manual

1. Product Brief

High Speed Dome Camera (hereinafter referred to as Camera) is remote HD IP Camera based on IP network

technology. It encodes and transmits HD video. Also, it can be deployed at any point of a surveillance network and

transmits videos via public or private IP network. Applying dedicated chip system and embedded structure, it

performs stably. The HD IR dome camera has efficient array IR lights, whose angles change with the chip zooming

which improves the image effect of IR light at night.

Live View

Apply high-performance progressive scan sensor, with clear image and vivid color;

High-performance video processing chip and efficient video encoding, providing HD video image;

Support Auto IRIS, auto focus, auto white balance, backlight compensation;

Support WDR, image setting, 3D noise reduction, motion detection, image flip, privacy mask;

Multi-stream to fit different network bandwidth;

Configurable OSD on video image;

PTZ

Built-in high speed PTZ, able to rotate continuously by 360° in pan and -20° ~ 90° in tilt, able to flip automatically;

Support proportional PT zooming, auto watch, last spot recovery, PT restriction, scheduled task, mixed mode and etc.

Alarm

With audio and alarm connectors, realize functions of talkback and alarm;

Motion detection and alarm linkage, make video surveillance intelligent;

Support alarm linkage edit: Alarm Text Overlay, Device Output, Live View Display and etc.

Networking

Support static address, DHCP or PPPoE;

Support NAT traversal, DNS and multicast technology

Storage

With SD card slot, when the network breaks down, video can be stored in local SD card;

Support local snapshot, default format is .JPG;

Support local recording, user can query and playback recording on PC;

Support dual system backups, secure data safety.

Summary of Contents for IPC427-D020-N






















































Search results

Summary of Contents for IPC427-D020-N

Reviews:

Related manuals for IPC427-D020-N

Brands by name

Popular brands

Kedacom IPC427-D020-N, User Manual

Search results

Summary of Contents for IPC427-D020-N

Reviews:

Related manuals for IPC427-D020-N

Brands by name

Popular brands