HD IR Dome Camera
User Manual
20
2) Check
“
Manually Restricted Patrol
” or “
Auto Restricted Patrol
”, adjust the PTZ to a proper position and
set it as the
Left Restriction
. Adjust the PTZ again to another position and set it as the
Right Restriction.
3) Settings take effect right after configuration. To clear restrictions, set one position both as the left and the
right restriction, then the restrictions will be cleared.
4) When enable
Manually Restricted Patrol
, user can control the PTZ manually to make it rotate between the
left and right restrictions only; when enable
Auto Restricted Patrol
, the PTZ can patrol horizontally between
the left and right restrictions only.
4.2.5
Path Mode
Path Mode means the camera patrols around all the valid preset patrol spots on a path. After enabling this
function, click any PTZ control button to disable this function. Currently, the camera supports 8 paths and the
max allowed number of patrol spot on each path is 32.
Picture 4-10 Path mode
Setting steps:
1) Go to
Settings > Camera > PTZ > Path Mode.
2) Select path from the dropdown list of
Patrol Path.
3) Click
“
Add
”. Set Patrol Spots and Stay Time in the popup interface. The max allowed number of patrol
spots on each path is 32.
4)
Click “
Save
”.
5) C
lick “
Delete
”, “
Load
” or “
Stop
” to perform respective operations.
4.2.6
Mixed Mode
Mixed Mode means camera patrols automatically following the historical PTZ patrol paths in a period of time.
At most 4 paths can be configured.
Summary of Contents for IPC427-D020-N
Page 1: ...KEDACOM User Manual for HD IR Dome Camera Version 03 July 2017 ...
Page 8: ...HD IR Dome Camera User Manual 4 2 Product Appearance Picture 2 1 IR Dome Camera ...
Page 13: ...HD IR Dome Camera User Manual 9 Picture 3 9 Web Client Interface ...
Page 46: ...HD IR Dome Camera User Manual 42 Picture 4 37 Restoration ...
