Kedacom IPC427-D020-N, User Manual

Page: 30 / 53

HD IR Dome Camera User Manual
26
Picture 4-20 Motion Detection
Motion detection supports full area detection and max 4 user-defined areas. The default is full area detection.
1) Go to Settings > Event > Intelligent Function > Motion Detection , and
check “
Enable
”.
2) Click
“
Clear All
” and then “
Edit
” and the image will be divided into 16 columns and 12 lines of small
squares. Click a square, drag toward lower right and click
“Stop”. Then the area is the detected area and it
turns purple red. A camera can support max 4 motion detection areas at the same time. Draw an area toward
upper left that contains the defined area, or click the defined squares
one by one to clear setting, or click “Clear
All
” to clear setting.
3) Drag the slide bar to adjust Sensitivity . The higher the value is, the more sensitive it is to the small
moving objects in the specific active area.