Keba KeDrive D3-DA BG3, Operation Manual

Page: 77 / 84

77
1 Appendix
Operation Manual KeDrive D3-DA BG3 and BG4
1804.200B.1-01 Date: 03/2023
Appendix
A.9 Hydrological data for the liquid cooling
CAUTION! Damage to the device due to condensation on the cooling plate
•
Carelessness can cause condensation on the cooling plate and as a
consequence irreparable damage to the device!
The temperature of the cooling plate is not allowed to be more than 10 °C below the ambient
temperature.
Note:
Sufficient removal of the heat from the chiller is to be provided by the
customer.
Requirements Limits
Coolant quality
Recommended: tap water + corrosion inhibitor
Corrosion protection by means of: 10-20% ethylene glycol by vol.
Limit concentrations:
Calcium < 50 ppm
Magnesium < 50 ppm
Total alkaline earth ions < 100 ppm
Chloride < 25 ppm
Sulphate < 25 ppm
Soiling
The coolant must be as pure as possible to ensure the channels are not clogged. With
a suspended matter concentration of more than 15 mg/dm³, continuous purification is
recommended.
Coolant temperature
The coolant temperature can be between 5 °C and 50 °C. The coolant temperature
must not be more than 10 °K below the ambient temperature to prevent condensation
on the heat sink.
Chiller material and the
connections
Aluminium
Table A.8 Requirements, liquid cooling
Note:
Do
not
use any combination of materials with contact corrosion such as
aluminium and copper in the cooling circuit. A combination of materials can
result in leaks and blockages of the cooling lines.
Size BG3 BG4
Device
D3-DA 320/C-24xx
D3-DA 320/C-32xx
D3-DA 310/C-45xx
D3-DA 320/C-45xx
D3-DA 310/x-80xx
D3-DA 310/C-A3xx
D3-DA 310/C-B1xx
D3-DA 310/C-C0xx
Coolant pressure
(Operating pressure)
≤ 3 bar
Coolant flow rate
(Rated value)
12 l per min.
Table A.9 Hydrological data for the liquid cooling