
7
Figure 3-3
Front drain valve
Figure 3-4
Safe & Easy Filter
SIDE VIEW WITH FILTER IN BATTERY AND
SIDE VIEW WITH FILTER UNDER
UNDER NO CIRCUMSTANCES SHOULD YOU
PERMIT HOT OIL TO COME IN CONTACT WITH
WATER OR ICE. ALL DRAINING SHOULD BE DONE
UNDER THE SUPERVISION OF PROPERLY
TRAINED PERSONNEL. A DRAIN PIPE AND
COVERED CONTAINER SUITABLE FOR USE WITH
HOT OIL SHOULD BE USED WHENEVER A FRYER
IS DRAINED. ALWAYS DRAIN OIL
INTO A
COVERED RECEPTACLE APPROVED FOR THE
TRANSPORTATION OF HOT OIL.
CLEANING AND BOIL-OUT
When cleaning and boiling out your fryer use Keating
Sea Powder and Keating Klenzer to keep your fryer in
top condition. Keating Sea Powder dissolves any
grease build up—even carbonized grease in fryer
vessels—one of the leading causes of premature oil
breakdown. And once your fryer vessel is clean, use
Keating Klenzer, the finest dry stainless steel polish
available, to restore your Keating Instant Recovery
®
Electric fryers’ exterior to its original luster.
To avoid damaging the fryer, do not power wash,
spray or hose it down while cleaning.
Figure 3-5
Keating Klenzer and Sea Powder
1. Put on safety attire. See page 6 - Draining.
2. Turn the fryer off.
3. Drain oil from fryer, see page 6. Filtering may be done
at this step.
4. Remove oil container to a secure area to prevent
accidental spillage.
5. Fill fryer vessel to “Max Level” line with water.
UNDER NO CIRCUMSTANCES SHOULD THE
FRYER BE LEFT UNATTENDED DURING BOIL-OUT.
TRAINED PERSONNEL
MUST BE PRESENT
DURING THE PROCEDURE TO PREVENT BOIL
OVER OR TO TURN OFF THE POWER IF WATER
DROPS BELOW HEATING ELEMENTS.
6.
Set thermostat and turn fryer on to bring water to a
gentle boil.
7.
Once boil has been reached, turn fryer off.
8.
Dissolve
2
/
3
cup of Keating Sea Powder for every five
gallons of water and let soak for
1
/
2
hour. If there is a
large build-up of carbonized grease, allow fryer to
soak overnight.
Do not damage or remove thermostat bulb as this
may affect the accuracy of the fryer.
9. While soaking, a natural fiber brush may be used
to scrub the inside walls of fryer.
10. Drain the water and Sea Powder into a dry,
suitable receptacle and remove from cooking
area.
DRAIN VALVE
DRAIN VALVE