background image

     

keatingofchicago.com

2

DESCRIPTION

Keating MIRACLEAN® Gas Griddles with electronic 
ignition are designed to give maximum production ef-
fi ciency, delivering high quality food products. The fol-
lowing design features are incorporated into Keating 
MIRACLEAN® Gas Griddles with electronic ignition.  

The Keating MIRACLEAN® Griddle is designed to 
provide maximum performance with many benefi ts to 
the operator. The mirror surface of the MIRACLEAN® 
is achieved in a special eight step process in which 
industrial grade hard trivalent chromium is applied to 
a 19mm thick steel plate. High input burners rated at 
10,080 KCAL for Group 2 gases are mounted every 
305mm to ensure performance and recovery and 
allows the operator to use zone cooking for different 
products.

The Keating MIRACLEAN® Griddle consists of a 
griddle plate having a drain trough and perimeter 
installed in a cabinet equipped with gas burners, an 
automatic temperature control mechanism and 100% 
safety shut off are all arranged and designed for the 
proper cooking of food on a griddle surface.

The mirror smooth surface of the MIRACLEAN® pre-
vents food particles from being trapped on the plate 
and later cooking out to other foods thus affecting 
taste. With the Miraclean® there is no need worrying 
about this morning’s pancakes tasting like last night’s 
liver and onions!

MIRACLEAN® Griddles feature zoned temperature 
control to ensure temperature accuracy in cooking. 
With the MIRACLEAN® surface there is no need to 
overcompensate for radiated heat loss by starting 
at higher temperature settings. The MIRACLEAN® 
surface allows the operator to cook at lower tem-
peratures to control the degree of caramelization and 
product shrinkage.

Cleaning a MIRACLEAN® surface takes just three easy 
steps: scraping with the Keating Scraper, washing 
with the Palmetto brush and water, and using Keating 
Klenzer and a damp cloth to polish. No more griddle 
bricks, grill screens or harsh chemicals are needed, 
and seasoning the plate is not necessary.

INTENDED USE

Keating commercial griddles are not intended for 
household use. Installation in household voids 
warranty.

STANDARD FEATURES

• MIRACLEAN® energy efficient plate

• Welded stainless steel perimeter

• Welded stainless steel grease trough

• Stainless steel control panel

• Baffled grease drawer with rear handle 
   (side trough models)

• Electronic spark ignition system

• 100% safety shut-off

• 230–24 VAC System

• Automatic pilot relighting

• Gas and air adjustments

• Gas pressure test ports

• 230 VAC 2 meter neoprene cord without an    
   attachment plug cap

• Lighted main power on/off switch

STANDARD ACCESSORIES

• 102mm special Keating spatula

• Keating griddle scraper

• Package of 10 scraper blades

• Palmetto brush

• Keating trough scraper

• Keating egg turner

• Keating Klenzer Sample

OPTIONS

• G20-G25 or G31 gas

• Front trough (with removable front grease 
   container)

MODEL VARIATIONS

Griddles with Electronic Ignition:

 Keating 

MIRACLEAN® Gas Griddles with electronic ignition are 
available in sizes ranging from 610mm to 1830mm 
wide and in depths 610mm, 762mm and 914mm. 
MIRACLEAN® Gas Griddles with electronic ignition are 
CE certifi ed.

SAFETY PRECAUTIONS

THIS SYMBOL WARNS YOU THAT SERIOUS BURNS 
OR OTHER INJURIES MAY RESULT IF SAFETY 
INSTRUCTIONS ARE NOT FOLLOWED.

 

• This manual should be retained in a safe place 
   for future reference. Installation of your new 
   griddle must conform to local codes or, in the 
   absence of local codes, to the current European 
   standards.

• No frame or restriction shall be constructed 
   around the lower part of the MIRACLEAN® griddle 
   that will restrict air movement into a MIRACLEAN® 
   griddle combustion area or prevent proper 
   ventilation.

Summary of Contents for Miraclean 2000+ Series





























Reviews: