background image

1-800-KEATING

 

|

   

MIRACLEAN®GAS GRIDDLE

DO NOT HACK, CHOP, HIT OR CUT ON THE 
MIRACLEAN® SURFACE.

 You will dent the steel plate 

under the trivalent chrome. It is even possible to 
hack two nicks close together and actually tear the 
MIRACLEAN® surface as the chromium will not stretch. 
Figure 5 is a sketch showing the side view of a griddle 
plate and how the surface can be damaged. Proper use 
of the utensils supplied with your Miraclean® Griddle will 
prevent surface damage.

NOTE: 

Damage done to the MIRACLEAN® surface is 

irreparable.

CLEANING THE GRIDDLE SURFACE

The surface of the MIRACLEAN® Griddle is very durable 
and with proper care, following the procedures below, 
will last many years.

A sample of Keating Klenzer, Keating palmetto brush 
and a 102mm scraper are included with each new 
griddle.

1. Scrape MIRACLEAN®   
    surface.

2. Clean with potable water 
    and a Keating palmetto 
    brush.

3. Polish surface with 
 

Keating Klenzer. Rinse 

    with water to remove 
 excess 

Keating 

 Klenzer.

BECAUSE OF THE SUPERIOR MIRACLEAN® SURFACE, 
THE ONLY TOOLS YOU WILL EVER NEED TO CLEAN 
THE GRIDDLE ARE A NATURAL BRISTLE BRUSH AND 
A KEATING SCRAPER.

 

NEVER USE A GRIDDLE STONE, BRICK OR SCREEN 

TO CLEAN THE MIRACLEAN® SURFACE.

  

 

THE DAMAGE DONE TO THE MIRACLEAN® SURFACE 

IS IRREPARABLE.

 

NEVER USE ICE TO COOL THE MIRACLEAN® 

SURFACE. USE OF ICE MAY WARP THE MIRACLEAN® 
SURFACE.

 

 

USE ONLY KEATING SUPPLIED CLEANING TOOLS 

AND KLENZER.

 

USE ONLY A KEATING STEEL SPATULA.

 

DO NOT WASH STEEL SPATULA WITH CHLORINE OR 

BLEACH AS IT WILL DISCOLOR.

 

DO NOT CLEAN SCRAPER ON SPLASHBACK.  

GREASE BUILD-UP WILL OCCUR WHICH MAY RESULT 
IN A FIRE.

 

DO NOT STORE ANYTHING IN OR ABOVE THE FLUE 

OF THE MIRACLEAN® GRIDDLE.

CLEANING THE UTENSILS

Spatulas

 should be hand washed 

in mild to medium strength deter-
gent and towel dried. 

NOTE:

 Avoid contact with Chlorine 

or bleach, it will discolor the steel 
spatula. Rubbing the spatula with 
vegetable oil will slow discoloration.

Rinse 

scraper

 and carefully wipe 

blade with a dry cloth. Cover 
blade with plastic protection 
cover when not in use.

Rinse Palmetto brush until 
clean.

7

HAMBURGER 
SPATULA

GRIDDLE
SCRAPER

Figure 5

Surface Damage

Summary of Contents for Miraclean 2000+ Series





























Reviews: