© Copyright 2016 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Q.1.35 January 2016
Page 13
25
25
Controller Mounting
Locate the 4 stainless steel screws in the accessories kit
Install the 4 screws
Place the controller on the mounting screws and tighten down the
screws.
26
26
Final Step
Leave these installation instructions onsite in a convenient loca-
tion, where it can be easily located, for future service.
27
Setting the dip switch to activate on board buzzer
To disable the audible alarm buzzer feature of the KE2 Adaptive
Control the dip switch must be switched to OFF (default from the
factory is ON)
The red dip switch is located at the bottom of the controller, and is
equipped with a switch that indicates ON or OFF.
By selecting OFF, the buzzer will be in an inactive state, and will not
sound when any type of alarm occurs.
Buzzer
dip switch
KE2 Adaptive
Control
Quick Start Guide
