3
place
where
the
gyro
should be.
·
CCD:
used to 'see' ground to avoid drifting. To see ground effectively
,
CCD
should
be
mounted
on suitable place, and lens must face to
the
ground
,
and
CCD
must
'
see
'
the
ground well without any obstruction.
KDS Flymentor 3D has following functions:
·
Control all movement,
including
attitude
stabilization
,
speed
control
,
position
locking
.
·
CCD sensor to capture picture of ground, comparing pictures to avoid drifting.
·
Switch working mode (horizontal mode and position mode) through AUX channel.
·
Integrating
head
locking
gyro
and
swashplate mixer.
·
Control sensitivity
and
mode
of
internal
gyro
through
GEAR
channel
.
·
Support swashplate
3
S
1 20º, 3
S
1 40º, 4
S
9 0º, 4
S
9 0º+4 5º
·
Keep balance in inverted flight.
·
Configured
by
computer
through
USB
.
·
If you are using FM/PPM
remote
control
device
,
when
helicopter
is
out
of control
,
the
Flymentor 3D
will
set
aileron
,
elevator
,
rudder
to
neutral
,
and keep pitch
in
the
final signal
position
,
and switch to positioning
mode
automatically
,
the
sensitivity is 70%.
1.2 Specification
·
·
Current: 55mA (under 5V)
·
Weight:37G
·
Temperature: 0
℃~ +40℃
·
Under the stabilisation mode and positioning mode, maximum rotate speed
allowed
:
√
Aileron and Elevator: ≤200
°/
s
√
Tail turning (if using external gyro): ≤360
°/
s
Voltage: 4.8-6.0V
KDS Flymentor 3D
User
Manual
07-17-平衡仪说明书(英文).pdf 6
2009-8-3 15:06:45