48
Data management
Data management
Using a microSD card
Your IS12F supports use of microSD cards and microSDHC
memory cards.
• Do not turn off the IS12F or subject it to impact while
microSD card data is being accessed. Doing so creates
the risk of data corruption.
Installing and removing a microSD card
• Before installing or removing a microSD card, first turn off
the IS12F and remove the battery pack.
■ Installing a microSD card
With the metal contact
side of the microSD
card facing down,
carefully insert the
card into the slot and
push until it clicks
into place
Attach the battery pack and cover
microSD card
insertion entrance
◎ Make sure of front and back/top and bottom of the microSD
card.
Trying to force a wrongly oriented card into the slot could make
it impossible to remove the card and result in damage.
■ Removing the microSD card
Carefully push the microSD card until it
clicks, and then release it (①)
When the microSD card clicks, pull forward lightly holding
with your fingers. Keep holding the microSD card which pops
up slightly. If you release your fingers from the microSD card
right after pressing on, the microSD card may jump up.
Pull the microSD memory card straight out of
the slot (②)
Attach the battery pack and cover
◎ Do not touch metal contacts of microSD card.
◎ Do not pull the microSD card by force. Doing so may cause a
fault or loss of data.
②
①