18
Continuous
Therapy Off
0mmHg
On/Off
Clinician Mode
6 Aug 2009
15:06
Utilities
Therapy
9. Plug the power supply cord into the ActiV.A.C.
®
unit. Verify the ‘plug’
icon reappears and the Battery Charging Indicator LED is lit.
10. Grasp the power cord approximately 3” (75mm) from the end plugged
into the ActiV.A.C.
®
unit and ‘wiggle’ the cord. Observe both the
Battery Charging Indicator LED and the ‘plug’ icon on the touch screen.
Should either of these indicators flicker, repeat the wiggle test using a
different power supply cord.
11. Should the ActiV.A.C.
®
unit fail any of the above steps, contact KCI (see
page 28).
Continuous
Therapy Off
0 mmHg
Pressure
Exit
+
_
125 mmHG
Continuous
Therapy Off
0 mmHg
Confirm
OK
Back
Pressure:
125 mmHg
Mode:
Continuous
Intensity: Low
Clinician Mode
6 Aug 2009
15:06
12. Attach a regular ActiV.A.C.
®
300 mL canister that has been designated
a ‘test canister’ to the ActiV.A.C.
®
unit.
13. Ensure that a tubing cap is attached to the canister tubing.
14. With the ActiV.A.C.
®
unit still in Clinician Mode,
15. Press ‘Therapy’.
16. Press ‘Next’.
17. Press ‘Settings’.
18. Press ‘Pressure’ and if necessary use the arrow keys to set the pressure
to 125.
19. Press ‘Exit two times.
20. On the Confirm screen, ensure that settings are Pressure: 125 mmHg;
Mode: Continuous; Intensity: Low. If these settings are not correct,
press ‘Back’ to change the incorrect setting.
21. Press ‘OK’.
