22 - EN
7.3.6 SELECTI NG PROGRAMS
The control allows to select from a list of programs.
Press
MENU
and
until positioned on:
Menu 03
By pressing the
ENTER
key, the program set is displayed.
By pressing the
or
key, select the desired program.
By pressing the
ENTER
key, con
fi rm and start the machine with the program selected.
Completes the modi
fi cation of the values. Press the
MENU
key twice to exit the menu,
or do not operate.
The board has 7 programs from P0 to P6 and can be customized by the user and maintain the memory until they are
changed.
The P0 program is an aging program integrated in a factory with SET values described in the table.
The programs P1 to P6 are free, to be modi
fi ed according to needs. Do not use programs P7, P8, P9.
Program
Name
Phase 1
Phase 2
Phase 3
Phase 4
Phase 5
Phase 6
P-0
Prog 0
Duration: 12g
Set: 1°C
Ur%: 90%
Ri%: 0%
Duration: 8g
Set: 4°C
Ur%: 85%
Ri%: 0%
Duration: 6g
Set: 2°C
Ur%: 70%
Ri%: 0%
Duration: 0ff
Set: 10°C
Ur%: 75%
Ri%: 0%
Duration: 0ff
Set: 10°C
Ur%: 80%
Ri%: 0%
Duration: 0ff
Set: 10°C
Ur%: 75%
Ri%: 0%
7.3.6a BASE PROGRAMS
By selecting a program from Menu 3 (Par. 7.3.6) and pressing the
ENTER
key, the controller starts from the
fi rst phase
of the seasoning cycle.
I f the preloaded P0 program is not appropriate, one can customized programs P1, 2, 3, 4, 5, 6 (See 7.3.6.b).
After the aging program, the device proceeds with the last step SET.
The word
fi ne (end) will appear on the display with the time passed from the end at the side, the buzzer rings for 10
seconds.
After the ageing program, if the
key is pressed for a prolonged period of time, the control restarts the cycle as
soon as phase 1 is concluded, “Reload” appears on the display or, by pressing the
key, the switches off.
When the appliance is switched back on it will start from the
fi rst phase of the last program used.
During functioning, with the
or
key, it is possible to display the date and time when the seasoning program
will end.
A selected program can be run by starting or proceeding from the desired F1-F2 ...
fl ashing step (see 7.3.6.b) by
pressing the On/ Off button for 3 seconds.
The buzzer sound (x3) shows the effective switch-to-desired step, continuing the operation of the selected step program.
Menu 03
select programs
P01
Program.
1
P02
Program.
2
t 13 °C Ur 75%
14d
Ri 40%
f1
