KBS S 56 SC, Operating Manual

Page: 10 / 74

PLEASE INSERT SHELVES AS
SHOWN, KEEPING PRICE LOGO
STICKER STRIP IN FRONT.
STICKER STRIP
5
Standard
S helf
Bottom
S helf
For Models With Option-1 :
There are shelves shipped inside the visi/cooler.
First insert the uppermost shelf in the uppermost hooks in the body Insert the others correspondingly with
the same method. Chilling process in the body takes place through the internal air circulation. Therefore do
not place the shelves very close to one another.
For Models With Option-2 :
There are shelves and shelf supports shipped inside the visi/cooler.
Carry out the following to mount the shelves
- Pilasters are numbered to provide height adjustment between the shelves in line with the product
requirements. Place the shelf supports into corresponding notches on the pilasters. For an easy
placement, use a pair of pincers to grip the support ends.
- Lay down the shelves on the visi/cooler floor. (Make sure that the right-angled (90°) side is at the rear).
- Hold the uppermost shelf; tilt one side and place on the hooks on the corresponding supports.
- Do the same for the remaining shelves and mount them all.
- If present, place the bottom shelf on the base of the visi-cooler.
ATTENTION :
Do not ever load anything on the base of your visi-cooler.
Always use bottom shelf .