KBS S 56 SC, Operating Manual

Page: 12 / 74

If you have a wheeled product, there are 2 safety feet on the front of your product.
ATTENTION !!!
Unless they are damaged and replaced by the same feet do not remove the safety feet
under any circumstances !
Never change the safety feet while the cooler is running ..!
C hange the safety feet by tilting the product towards the back or right side of the product.
Never change the safety feet while the cooler is in the upright position.
7
There might be a leakage current relay in the feeder cable of your refrigerator.
To test if the leakage current relay works properly, press the yellow "TEST" button shown in following
picture, the light will be off and the power of your refrigerator will be stopped when you press it . You can
energize the refrigerator again by pressing "RESET" button.
In case any leakage current, the power of your refrigerator will be stopped automatically. If your refrigerator
does not work and the lamp connected to plug in cable and shown in following picture does not shine, press
the "RESET" button. The light will be on when your refrigerator works. If your refrigerator does not work
again, please apply to authorized service.
TEST
LAMP
RESET
ONLY AVAILABLE FOR MODELS HAVING A VOLTAGE REGULATOR :
Voltage regulator of your refrigerator protects the unit against mains voltage fluctuations. When mains
voltage fluctuates out of permissible range, voltage regulator turn off the power supply of the unit, end
when mains voltage is back in the permissible range, the device will operate again. However, even in case
mains voltage is back in permissible range instantly, the voltage regulator will turn on the power supply
after a 3-minutes delay, to protect the device against voltage peaks and voltage dips.
ONLY AVAILABLE FOR MODELS HAVING A LEAKAGE CURRENT RELAY :
SAFETY FEET :
Roller Wheels
Safety Foot
Safety Foot