KBS S 56 SC, Operating Manual

Page: 11 / 74

6
Your cabinet has been fixed with 4 metal brackets on wooden pallet before shipping .
Please follow the instructions below before placing on its place.
metal
brackets
screws
Detach by unbolting 3 screws and remove metal
bracket fixed cabinet and wooden pallet in front and
back sections through a cutter device. Lean cabinet
backwards from backside and remove pallet from
underneath cabinet. Observe floor of cabinet and if not
smooth, put product on scales.
For models with metal sheet connectors
• For models without metal sheet connectors
Your Single Door visi-cooler has been delivered on a wooden pallet, fixed to the body at four corners.
Please carry out the following to detach the pallet before the body is set in its final operating location:
* Cut the 4 cable ties fixing to pallet to the cooler chassis by the means of a hand tool
(Except to S 56 SC and S 88 SC )
* Use a wrench to loosen and remove the head screws on the front and rear corners that fix the pallet to the
base. (Only for S 56 SC and S 88 SC)
* Carefully detach the pallet from the body base. Please find the feet of the visi/cooler provided interior.
Insert them in the screwed sockets at the bottom of the visi/cooler and make the height adjustment.
CAUTION: The adjustable legs on the front side of the cabinet should never be opened at the same
time. Depending on the imbalance of the product, only one of the adjustable legs on the right or left
side should be opened and the product should be balanced in this way.