Rev. 1.00
22586_EDEBD
A0253-0318-1_EN
6
KBR multicomp F144-3 6DO/6RO
Introduction
Safety notes
In order to prevent operating errors, handling of the device has been kept as
simple as possible. This will enable you to use the device very quickly. In your
own interests, however, we recommend you read the following safety instruc-
tions carefully.
DANGEROUS VOLTAGE
The applicable DIN/VDE regulations must be observed for installation!
Power supply connection, setup and operation of the device may only be
performed by qualifi ed personnel. Qualifi ed personnel as defi ned in the safety
notes in this user manual are personnel with electrical engineering qualifi ca-
tions, knowledge of the national accident prevention regulations and safety en-
gineering standards as well as of the installation, commissioning and operation
of the device.
To reduce the risk of fi re or shock hazard, the device must not be exposed to
rain or humidity!
Before connecting the device to the power supply, check whether the local
power supply conditions comply with the specifi cations on the device name-
plate.
A faulty connection may result in the destruction of the device!
When connecting the device, ensure that the data given in the connection
chart is complied with (see "Connection diagram") and that the connection
cables are not live. When wiring, always ensure that all wiring material used is
neither damaged nor defective and that the polarity is correct!
In order to ensure proper and safe product operation, ensure that the device is
transported, stored, installed and assembled and carefully operated and main-
tained in accordance with the specifi cations.
If the device is visibly damaged it should generally be considered unsuitable
for use and disconnected from the power supply. Troubleshooting, repairs and
maintenance work may only be carried out in our facilities or after contacting
our service team.
Unauthorized opening of the the device will render your warranty null and
void. Correct operation can no longer be guaranteed!
Opening the device may expose live parts. Capacitors in the device may still be
charged, even if the device has been disconnected from all power sources. Do
not operate open devices under any circumstances!
Systems that are at risk from lightning strikes must be fi tted with lightning
protection for all input and output cables (see the "Protective measures" chapter
for recommendations).
