Rev. 1.00
22586_EDEBD
A0253-0318-1_EN
31
KBR multicomp F144-3 6DO/6RO
Description of the display window
The missing compensation power is displayed up to a maximum value of
9999.9 kvar. If the value exceeds this limit, 9999.9 kvar is displayed
Power frequency in Hz
THD (Harm. U total) in %, decisive for setting the THD limit (Extras menu, THD
limit submenu)
Current temperature reading (if temperature measurement is activated; --- °C is
displayed if measurement is deactivated)
Number of overtemperature switch-off s (if temperature measurement is acti-
vated; --- °C is displayed if measurement is deactivated)
It is important to know the fi rmware version of the controller, e.g. V 2.00R001
for support requests, as it can be used to deduce possible changes made to the
device fi rmware.
8.4
Stage state window:
Stage state
next
Press
W
to select submenus.
The submenus in this window display whether or not the capacitor stages
connected are working in automatic mode, or if they are switched on or off
permanently. The individual capacitor stages can be selected by pressing
W
.
You can change the stage state from
Auto
(Automatic) to
ff
(switched off
permanently) or
n
(switched on permanently) by pressing
U
to start enter-
ing values,
V
to make changes or
X
to save them.
NOTE
Capacitor stages that are permanently switched on or off are not available to
calculate the optimizing automatic operation
.
