Rev. 1.00
22586_EDEBD
A0253-0318-1_EN
40
KBR multicomp F144-3 6DO/6RO
Description of the display window
Sampling rate:
The power frequency tracing settings are displayed in this submenu. If the
setting is "Auto", the sampling rate is tracked automatically in a range from 40
to 70 Hz. Alternatively, a fi xed sampling rate of 50 Hz or 60 Hz can be set.
Reset:
The Reset menu item off ers various methods of resetting the programmed
controller parameters. The programmable parameters are reset to the default
settings.
This has the advantage that all confi gured parameters are deleted at the same
time and the controller restarts with the default settings.
Perform reset:
Extras menu, Reset menu item
Press
U
= Reset fl ashes
Press
U
and
V
simultaneously =
done
is displayed
After about 2 seconds,
Reset
is displayed again
NOTE
The reset process can be interrupted by pressing
X
.
Contrast setting:
The contrast settings of the LCD can be changed in this submenu. Setting
range: 0 to 10.
Brightness setting:
The LCD brightness can be changed in this submenu.
Setting range: 0 to 9.
Dimmer brightness:
The LCD dimming can be changed in this submenu. Setting range: 0 to 9. The
brightness is reduced after a set time of 15 minutes.
Light load limit:
In this submenu, the light load detection limit can be changed to either 15
mA or 50 mA.
Light load delay:
The light load detection delay time can be changed in this submenu. It can be
varied between 1 and 60 minutes.
Fan relay:
In this submenu, you can set the last stage output (stage 12) as a compensa-
tion stage output or fan output.
