installation manual
16
Middle fan speed
Fig.7-21
● Heating capacity and cooling capacity are tested under the
standard allowable min. static pressure; the 71 test static
pressure is 25Pa, 80/90/112 test static pressure is 37Pa,
140/160 test static pressure is 50Pa, the 200/250/280 test
pressure is 62Pa.
● The static pressure refer to Table.12-2
.
Panel installation
●
Unload inner frame.
Slide the knob, release the buckle from the outside frame hole,
then unload the inner frame.
Inside frame
Fig.7-11
●
Hang the outside frame on the main body with face down. (4
places at 4 corners).
Hang the belt on the hook of the main body.
Low fan speed
Fig.7-22
The signal wire of the remote-control receiver must be drawn out
through the canvas air passage.
●
Fix the outside frame and the canvas air passage with screws.
Screw must be fixed on from the bottom to the top.
Fig.7-14
●
Hang up the outside frame until it sticks to the ceiling tightly.
Fig.7-15
NOTE
Knob
Buckle
Outside frame
Fig.7-12
Fig.7-13
Main body
Canvas air passage
Waist-shaped hole
fixed board
Ceiling
Outside frame
Hook
Belt
Outside frame
Canvas air passage
Screw
Ceiling
Canvas air passage
Main body
Air passage
Ceiling
Outside frame
Summary of Contents for KPDHF-71 DN3.0
Page 2: ...MD14I 041FW DZ2 16100101A01132...
Page 28: ......
