Kaysun COMPAK KHP 15/190 ACS1, Installation & Owner'S Manual

Page: 17 / 24

No Icon Description
No Icon Description
E-heater:
Timer
will be lightened if e-heater is activated,
otherwise will be extinguished.
If e-heater is automatically activated by unit,
will be lightened;
There are six timers can be set.
If anyone of them has been set,
will lighten the corresponding one when
screen is unlocked
˗
Ļ
If e-heater is manually activated, will flash
with 0.5Hz frequency.
When setting e-heater manually ON/OFF,
will flash with 2 Hz frequency.
If there is none of timers has been set, it will
keep extinguished.
If timer is being set, will flash the
corresponding one with 2Hz frequency as
well lighten the timer which has been set.
Disinfect:
will be lightened when the unit is under
disinfect mode, otherwise will be extinguished.
will be lightened if disinfect mode is automati-
cally activated by unit;
will flash with 0.5Hz frequency, if disinfect
mode is manually activated;
Clock and clock setting
shows the clock.
Whenever there is any setting for clock,
will be lightened.
ļ
Ľ
will flash with 2Hz frequency when setting
disinfect mode or setting disinfect timer.
ķ ĸ Ĺ
High temp. Alarm
If setting water temp. is higher than 50
ć ˈ
will be lightened, otherwise will be
extinguished.
Ļ ĺ
Alarm:
When unit is under protection/error, will flash
with 5Hz frequency as well as buzzer will sound
3 times every 1 minute until protection/error
eliminated or press for 1 second.
ľ
Ŀ
ļ Ľ ľ Ŀ
Lock:
If button is locked, will be lightened,
otherwise will be extinguished.
Fig.5-3
Any press of button is effective only under button and display
unlocked state.
Table5-2
Temperature unit
If setting temperature unit as celsius, will be
lightened, will show celsius degree;
If setting temperature unit as Fahrenheit, will
be lightened, will show Fahrenheit degree.
Press for 10sec, it will change between
and .
ŀ
No. Icon Description
Manually turn E-heater ON
If E-heater is OFF, follow these steps below to
manually turn it on.
Invalid
Icon will flash.
If button is under lock mode, press any button
except unlock button, will be lightened.
Invalid
Confirm manually turning E-heater on,
then E-heater is activated to heat up water
to the target temperature. After that, if
need manually turn E-heater on again,
please repeat these steps.
Invalid
:
will be lightened if screen is unlocked.
It shows water temperature on normal;
It shows remaining vacation days on vacation;
It shows setting temperature on setting;
It shows unit setting/running parameters,
error/protection code on querying.
If E-heater is already ON, Press will lead
to show invalid icon
Long pressing the
on the display.
Invalid
button for 10s then can
shift to set the temperature display unit from "F" to
"C" or from "C" to "F". The default is "C"(when it's
shifted to display "F", it still will display "C" while
querying).
Reserved
Setting
INCREASE
If screen is unlocked, corresponding value will
increase by pressing
● When setting temperature, press
.
more than
1s, Temperature value will be increased continu-
ously;
14.1
will be lightened when setting water
temperature or setting days for vacation.
● When Setting clock/timer, press more than
1s, Clock/timer value will be increased continuously;
Date setting
● When setting vacation days, press more
will be lightened when setting days for
vacation;
than 1s, day value will be increased continuously;
14.2
On querying, check items will page up by pressing
will be lightened when on vacation.
Installation & Owner‘s Manual
13