KAYO MOTOR T2, Service Manual

Page: 50 / 61

ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.us - 49 -
but it will stall
immediately
filter duct
Lack of fuel supplementary fuel
Uneven engine
operation
Dirt on spark plugs, damage or
adjustment error
Remove spark plug for cleaning, adjustment and replacement
if necessary
Problem with spark plug Check the condition of the spark plug cap, check whether the
contact between the spark plug cap and the cable itself is
good, check the cable and replace the damaged parts.
Ignition rotor damage Change the rotor
The fuel was mixed with water Empty the fuel and inject new fuel
Inadequate engine
power or poor
acceleration
Problems with fuel supply Clean fuel system and check
Dirt in air filter Clean air filter, replace if necessary
Exhaust system damaged or
leaking
Check the exhaust system for damage and replace relevant
fittings if necessary
Dirt in carburetor nozzle Remove the carburetor and clean the nozzle
Crankshaft bearings damaged
or worn
Contact KAYO Service Centre
Engine sound
abnormally
Ignition problem Contact KAYO Service Centre
overheating See the "engine overheating section"
Tempering of
exhaust pipe
Carbon deposits in the
combustion chamber
Contact KAYO Service Centre
Gasoline inferior Replacement of fuel
The spark plug is in poor
condition or in poor
specification
Replace new spark plugs with correct specifications
Exhaust gasket aging Check that the exhaust system is damaged, that the gasket is
in good condition, and that if the gasket is aged, replace the
gasket
Smoke from exhaust
pipe
Oil contains moisture Replace the fuel
Black smoke from
exhaust pipe
Air filter blocked Remove and clean air filter
Excessive concentration of
combustible mixture
Adjusting the valve
Gearbox gear don’t
mesh
Clutch anomaly Contact KAYO Service Centre
To bend or jam a fork. Check and adjust the dial
Gearbar damaged Replace the gearshift lever
Shift drum damaged Replace the shift drum
Ratchet unit damaged Replace the ratchet unit
Stiter position spring loose or
broken
Replace the stiter position spring
Gear jump Fork worn Replace the fork
Tooth worn Check gears and replace if necessary
Gear worn Replace the gear