KAYO MOTOR T2, Service Manual

Page: 33 / 61

ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.us - 32 -
21 . Fuel system inspection
Make sure fuel tank, fuel tank cap, switch etc. has no leaks before driving.
22. Steering column adjustment
Steering column should be checked and adjusted frequently.
Place the motorcycle on stand with the front fork completely suspended.
Turn the handlebars to the middle position, if the handlebars continue to
move after letting go, the steering column is not tight. Hold the lower fork,
gently push and pull the fork, if there is a free moving clearance, the
column is not installed tightly.
steering column tightness adjustment
：

Fix bike and keep front fork suspended.

Loosen upper plate retaining bolts
；

Rotate adjusting nut to right position
；

Tighten steering shaft nut
；

Recheck the steering, repeat above process if necessary
；

Recovery of handlebar.
Steering column nut
Adjusting nut
23.Routine lubrication
All bike parts need to be lubricated regularly. After cleaning the bike with
low pressure water flow, the bike also needs to be lubricated. Use
antioxidants to clean rusty parts and remove residual oil, grease and dirt
from the surface before lubricated.
parts need to be lubricated
：

Rear brake pedal bearing

Rear brake pedal

Gear shift lever

Chain
Spray cables with cable lube.
note
：
After driving on wet roads, even if the chain looks dry, it must be
lubricated. Please use the recommended product for lubrication.