![background image](http://html2.mh-extra.com/html/kawai/mp7/mp7_owners-manual_3719205022.webp)
22
M
ai
n
O
pe
ra
ti
on
1
Zone Basics
As noted in the Introduction chapter, the MP7 features four zones: MAIN, SUB1, SUB2, and SUB. This page will
explain the process for turning zones ON and OFF, adjusting zone volumes, and creating a simple two zone layer.
Turning a zone ON or OFF
Press the button corresponding to the desired zone to turn that
zone ON or OFF.
The LED indicator for the pressed zone button will turn ON or
OFF to indicate the current status of the zone.
If a zone is turned OFF but then selected, a symbol will be
added to the left of the sound name in the LCD display.
Zone is
turned OFF
Adjusting the zone volume
Use the VOLUME fader above each zone button to adjust the
volume of that zone.
The volume of the zone will increase or decrease independently
of the other zones.
* When playing with just a single zone (e.g. MAIN), it is recommended to set
the volume fader to the maximum position and use the MASTER volume
fader to adjust the overal volume of the instrument.
To adjust the volume of all sound sections simultaneously, use
the MASTER VOLUME fader (page 12).
Creating a simple two zone layer
First, turn the MAIN zone ON, then select a piano sound.
Next, turn the SUB1 zone ON, and select a strings sound.
Play the layered piano and strings sound, adjusting the MAIN
and SUB1 volume faders to set the level of each sound.
LED indicator ON:
Zone is turned ON
Increase
volume
Decrease
volume
Zone Functions
* When a zone is turned OFF, information for the previously selected (or
neighbouring) zone will be shown in the LCD display.
* When tonewheel organ mode is selected and the sound edit screen shown
in the LCD display, these VOLUME faders are used to adjust the drawbar
positions of the organ. For more information please refer to page 32.
Summary of Contents for MP7
Page 2: ......
Page 145: ......
Page 146: ......
Page 147: ...Hello to Jason Isaacs Joep snijd je baard David thank you for your sharp eyesight...