![background image](http://html2.mh-extra.com/html/kawai/mp7/mp7_owners-manual_3719205035.webp)
M
ai
n
O
pe
ra
ti
on
Global Section
Adjusting EQ parameters (cont.)
While the gain page of the EQ is shown:
Press the CURSOR
button.
The frequency page of the EQ will be shown in the LCD display.
Previous
page
Press the CURSOR
buttons to select the desired EQ
parameter, then press the +/YES or -/NO buttons to increase or
decrease the values.
Alternatively, turn the control knobs (A, B, C, D) to adjust the EQ
parameter assigned to that knob.
Press the EXIT button to return to the main playing screen.
Jump to EQ Offset shortcut
The EQ Offset is a SYSTEM parameter used to offset adjustments made by the EQ. The purpose of the EQ Offset
is to allow a ‘baseline’ EQ to be applied independently of the EQ function, and therefore independently of the
selected SETUP. EQ Offset must be enabled in the SYSTEM menu for this shortcut to function.
* For more information about the EQ Offset function, please refer to page 109.
To jump to the EQ Offset screen, at any time:
Press and hold the EQ button, then press one of the F1~F4
buttons.
The EQ Offset screen will be shown in the LCD display.
Offset
page
The EQ Offset parameters are adjustable in the same manner as
the EQ gain parameters.
* The EQ Offset values will be added to the regular EQ values. The combined
EQ values are limited to ±10 dB.
Press the EXIT button to return to the EQ screen.
Press the EXIT button again to return to the main playing screen.
Mid1
frequency
Mid1
bandwidth
Mid2
frequency
Mid2
bandwidth
ho
ld
Summary of Contents for MP7
Page 2: ......
Page 145: ......
Page 146: ......
Page 147: ...Hello to Jason Isaacs Joep snijd je baard David thank you for your sharp eyesight...