![background image](http://html2.mh-extra.com/html/kawai/mp7/mp7_owners-manual_3719205041.webp)
1
ED
IT
M
en
u
EDIT Menu parameters
(INT mode)
2
.2 Amp Simulator
(MAIN zone)
1. Amp Type
This parameter selects the simulated amplifier type.
* For more information about the various Amp Simulator model types,
please refer to page 30.
2. Drive
This parameter adjusts the amount of overdrive produced by
the simulated amplifier.
* For more information about the Amp Simulator, please refer to page 30.
3. Level
This parameter adjusts the volume of the simulated amplifier.
* For more information about the Amp Simulator, please refer to page 30.
4. Amp EQ Lo
This parameter adjusts the level of the low frequencies of the
simulated amplifier.
* This parameter functions independently of the global EQ.
* For more information about the Amp Simulator, please refer to page 30.
5. Amp EQ Mid
This parameter adjusts the level of the mid frequencies of the
simulated amplifier.
* This parameter functions independently of the global EQ.
* For more information about the Amp Simulator, please refer to page 30.
6. Amp EQ Hi
This parameter adjusts the level of the high frequencies of the
simulated amplifier.
* For more information about the Amp Simulator, please refer to page 30.
* This parameter functions independently of the global EQ.
7. Mid Frequency
This parameter adjusts the mid frequency band of the
simulated amplifier, levelled by the Amp EQ Mid parameter.
* For more information about the Amp Simulator, please refer to page 30.
* This parameter functions independently of the global EQ.
8. Mic Type
This parameter selects the type of microphone used for the
simulated amplifier.
Mic Type
Description
Condenser
A microphone with a very broad frequency
response that is typically found in studios.
Dynamic
A microphone with a more limited frequency
response that is typically used for live playing.
* For more information about the Amp Simulator, please refer to page 30.
9. Mic Position
This parameter selects the position of the microphone used for
the simulated amplifier.
Mic Position
Description
On Axis
The microphone is placed in the centre of the
speaker, producing a direct, aggressive sound with
strong high/mid range.
Off Axis
The microphone is placed to the side of the speaker,
producing a smoother and more ambient sound.
* For more information about the Amp Simulator, please refer to page 30.
10. Ambience
This parameter adjusts the level (mix ratio) of an additional set
of stereo microphones, that are placed away from the simulated
amplifier in order to capture the ambient sound within a room.
* For more information about the Amp Simulator, please refer to page 30.
value
: 0 ~ 127
value
: 0 ~ 127
5
types
value
: –10 db ~ +10 db
value
: 200 H
z
~ 3150 H
z
value
: –10 db ~ +10 db
value
: –10 db ~ +10 db
o
n
a
xis
, o
ff
a
xis
c
ondenser
, d
ynamic
value
: 0 ~ 127
Summary of Contents for MP7
Page 2: ......
Page 145: ......
Page 146: ......
Page 147: ...Hello to Jason Isaacs Joep snijd je baard David thank you for your sharp eyesight...