3.1.6
Assembling the axle
▶ Place the ball bearing ②, pressure spring ③, sleeve ④, and driver ⑤ on the
drive axle ①.
▶ Insert the pin ⑥ into the driver ⑤.
3.1.7
Assembling the gearing
▶ Place the bearing cartridge ⑧ on the axle ⑦.
▶ Insert the ball bearing ③ into the planet gear carrier ②.
▶ Place the three planetary gears ⑤ and the outer wheel ⑥ on the planetary
gear support ② and then on the axle ⑦.
▶ Remove the planetary gear support ② including ball bearing ③.
Please note that the three planetary gears ⑤ including the outer wheel ⑥
need to be positioned on the axle.
▶ Place the pressure spring ④ on axle ⑦.
Technician's instructions SURGmatic S201 L - 1.009.0470
3 Assembly | 3.1 Assembly of the SURGmatic S201 L
12/19
