3.1.4
Assembling the elbow sleeve
Note
Take care not to damage the fibre-optic bundle when assembling the elbow
sleeve.
▶ Press the wire ring ⑤ into the groove on the elbow sleeve ⑧ and insert ball ⑥
and ball ⑦ into the elbow sleeve ⑧.
▶ Insert the fibre-optic bundle ① into the elbow sleeve ⑧.
▶ Insert the spring ④ into the small drilled hole on the tension ring ③.
▶ Add the tension ring ③, secure the spring ④ in the drilled hole on the elbow
sleeve ⑧ and turn the tension ring ③ until it locks into place.
▶ Carefully position the taper sleeve ② and press it into place making sure that
the fibre-optic bundle ① sits flush with the front of the taper sleeve ②.
3.1.5
Assembling the insert
▶ Insert the slide ② and pressure spring ①.
Technician's instructions SURGmatic S201 L - 1.009.0470
3 Assembly | 3.1 Assembly of the SURGmatic S201 L
11/19
