Instructions for use QUATTROcare PLUS 2124 A - 1.008.3805
5 Operation | 5.8 Set the blow-out time
5.8 Set the blow-out time
With the QUATTROcare PLUS 2124 A the blow-out time for straight and contra-angle
handpieces and turbines can be changed.
▶ Hold down the start key ②.
▶ Turn the main switch③ on.
ð
LEDs 1 to 4 of the LED display① light up one after the other.
The blow-out time is as follows for:
▪ LED 1: 15 seconds
▪ LED 2: 20 seconds
▪ LED 3: 30 seconds
▪ LED 4: 40 seconds
▶ Release the start key ② for the desired blow-out time.
ð
An acoustical signal is emitted if a blow-out time was set on the unit.
29 / 36
