Steps
1. Select User > 1300 Operational Settings > 1330 Patient Positioning.
2. Turn an option(s) ON or OFF:
•
Side Entry
Turn this option OFF if you do not wish to use the open (full view)
patient entry position. This might be necessary if there is no space
for the C-arm to move back.
•
Midsagittal and Frankfort Lights in Tomo
Turn this option ON if you wish to use the midsagittal and Frankfort
plane lights when you take 3D exposures.
•
Temple Supports
Turn this option OFF if you do not wish to use the temple supports.
•
Return C-arm Automatically
Turn this option ON if you wish to set the X-ray unit so that the
C-arm will automatically return to the starting position at the end of
an exposure cycle. Note, however, that the automatic function works
only if the exposure button is pressed and held down for the entire
duration of the exposure.
3. Select the green check mark button.
9.1.3.4 Exposure settings
About this task
Follow these steps to control exposure settings.
9 Settings
58 KaVo ProXam
Instructions for use
