Code
Explanation
Comments
H183
The attached sensor is not suitable
for the selected program.
Change the sensor.
H184
Remove the 3D sensor.
H185
The 3D sensor is not attached
properly.
Attach and / or lock the
sensor in position.
H186
No IP address defined for 3D
sensor.
H187
Problem during image data
transmission.
Exposure was interrupted.
Contact your service
technician for help.
H189
The screen was touched during
exposure.
Exposure was interrupted.
H190
Error in communication protocol
UID!
Retry or contact technical
support if problem persists.
H191
Error in communication protocol
state!
Retry or contact technical
support if problem persists.
H192
Command queue full!
Retry or contact technical
support if problem persists.
H193
Invalid scan settings.
Retry or contact your service
technician for help.
H194
X-ray connection not established!
Operating in standalone
mode.
H195
Request timed out while waiting for
X-ray unit to respond!
Retry or contact technical
support if problem persists.
H196
Version mismatch in communication
interfaces!
Update X-ray unit software.
H197
Eeprom reading failed!
Retry or contact technical
support if problem persists.
H198
Incompatible parts GPU-module not found in
Reconstruction PC.
Restart reconstruction PC or
contact technical support if
problem persists.
H199
The 3D reconstruction PC does not
support the CALM algorithm
Upgrade the 3D
reconstruction PC or
deactivate the CALM licence.
Contact your service
technician for help.
10 Help messages
70 KaVo ProXam
Instructions for use
