KaVo KaVo Primus 1058 Life TM, Care Instructions

Page: 7 / 44

Care instructions Primus 1058 Life
2 Setup methods according to DIN EN ISO 17664 | 2.2 General instructions for the reprocessing of KaVo treatment
units
Manual drying ▶ Supply dry, clean and uncontaminated compressed air according
to ISO 7494-2 only.
▶ Blow off the outside and inside with compressed air until water
drops are no longer visible.
Automatic drying Usually, automatic drying is part of the cleaning/disinfection cycle of
the washer disinfector and should not be carried out above 95 °C.
Servicing ▶ Discard damaged products.
Control and functional test ▶ Perform a visual inspection to check for damage and wear and
tear.
▶ Test products for function regularly.
Packaging ▶ Use standardised packaging material. Sealing should not be un-
der tension.
▶ Use sterile goods packaging in order to ensure sterility.
Sterilisation All sterilisable products are temperature-resistant up to max. 138
°C.
Select a suitable procedure (depending on the available autoclave)
from the following sterilisation processes:
▪ Autoclave with three times pre-vacuum:
- at least 3 minutes at 134 °C -1 °C / +4 °C (273 °F -1.6 °F /
+7.4 °F)
▪ Autoclave using the gravity method:
- at least 10 minutes at 134 °C -1 °C / +4 °C (273 °F -1.6 °F /
+7.4 °F)
▶
Use according to the manufacturer's Instructions for Use.
Storage
▶
Reprocessed products should be stored protected from dust with
minimum exposure to germs in a dry, dark and cool place.
▶
Comply with the expiry date of the sterilised items.
2.2.1 Reprocessing Overview Primus 1058 Life
Reprocessing items/medical
devices Cleaning Disinfection Sterilisa-
tion
manual automatic manual automatic automatic
Surfaces
Unit
Cushion
Gripping sleeve, white
Gripping sleeve, grey
Light
Dentist element
Handpiece sleeve 3F and MF
handpieces
Cannula for 3F and MF hand-
pieces
Holder pad/anti-slip mat
Handpiece holder
Swing-arm S-table
Assistant element
7 / 44