manualshive.com logo in svg

KaVo Globus 1078 S, Instructions For Use Manual

Share
Download
KaVo Globus 1078 S Instructions For Use Manual Download Page 59

Note
The torque wrench is subject to natural wear and should be changed when it longer

works properly. (

Mat. no. 1.000.4887

)

The following settings can be changed:

▪ Water emission

▪ Intensity

▪ Cold light

Attaching the instrument insert

▶ Screw in the instrument insert into the handpiece using the torque wrench that

is provided as an accessory.

▶ Tighten the torque wrench until it slips.

The maximum torque is reached.

Adjust the water emission

▶ Turn the ring on the handpiece.

Adjust the PIEZOlux without Memospeed

The cold light is set and saved as with the turbine.

The intensity is adjusted in the same manner as setting the speed of the turbine.

Adjust the PIEZOlux with Memospeed

The cold light is set and saved as with the turbine.

Set intensity

Note
The intensity can be set in level E only with the foot pedal.

The intensity is set in steps of 0.25; the minimum intensity is 1, and the maximum

is 10.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Instructions for use Globus 1078 S
4 Operation | 4.8 Using instruments

57/75

Summary of Contents for Globus 1078 S
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands