manualshive.com logo in svg

KaVo Globus 1078 S, Instructions For Use Manual

Share
Download
KaVo Globus 1078 S Instructions For Use Manual Download Page 56

T

M

or

▶ "Preselected spray" footswitch.

Two LEDs shine when the spray cooling level is activated.

Storing values

E123

▶ Press the "Level selection" button until you hear a beep.

The set values are saved for the set memory level and the set dentist level.

4.8.4

   

Using the INTRA Lux Motor K 200 and INTRA Lux Motor KL

701

Note
Follow the instructions for use and assembly in the instrument packaging.

The following settings can be changed:

▪ Direction of motor rotation

▪ Speed

▪ cold light intensity

Note
The direction of motor rotation and the speed are set using the keys on the control

element or the foot control.

Note
The minimum and maximum speed depends on the motor and the attached hand‐

piece or contra-angle handpiece.

The speed cannot be stored.

Note
The motor mode is equivalent to 2 minutes operating time and 5 minutes pause.

This represents the possible maximum load of the motor (full load at maximum

speed).

In practice, pulse loads lasting seconds or pause times lasting seconds or minutes

are realistic given that the maximum possible motor current is not normally reached.

This equates to the dentist's normal way of working.

 

 

 

 

 

Instructions for use Globus 1078 S
4 Operation | 4.8 Using instruments

54/75

Summary of Contents for Globus 1078 S
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands