manualshive.com logo in svg

KaVo Globus 1078 S, Instructions For Use Manual

Share
Download
KaVo Globus 1078 S Instructions For Use Manual Download Page 58

The display switches to the setting menu for maximum.

▶ Press the "Increase value" or" Decrease value" button until the desired value is

displayed.

E123

▶ Press the "Preselect level" key.

The display changes to the setting for the cold light intensity.

Setting cold light intensity

The cold light intensity is adjusted in the same manner as with the turbine.

See also: Setting cold light intensity, Page 53

The values are saved in same manner as with the turbine.

See also: Storing values, Page 54

4.8.5

   

Operating the PIEZOlux

CAUTION

Danger of injury when the torque wrench is laid down.

The sharp-edged instrument insert can cause injury.

▶ Leave the torque wrench on the handpiece when it is not being used.

CAUTION

Danger of injury from a defective instrument insert.

Insert breaks off.

▶ Before each use, check the condition of the instrument insert and apply ap‐

proximately 10 N (about 1 kg).

10 N

 

 

 

 

 

 

 

 

Instructions for use Globus 1078 S
4 Operation | 4.8 Using instruments

56/75

Summary of Contents for Globus 1078 S
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands