KaVo Globus 1078 S, Instructions For Use Manual

Page: 42 / 79

Note
The seat and backrest can be moved at the same time. When the operating voltage
for the patient chair is below 200 V, the movements in the automatic program can
only be sequential.
Save the chair position
The chair positions can be saved and retrieved at any time by the press of a button.
Win the position is retrieved, the chair automatically moves to the saved position
(the so-called "automatic position," or "AP" for short).
The four chair positions can be saved on the control panel. Two of the positions can
be saved with the foot control.
It is for example recommendable to save the sitting down and getting up position
using the "AP 0" key and the rinsing position with the "SP" key.
▶ Move the chair into the position that is to be saved.
▶ Briefly press the LP/AP button.
The LEDs of the buttons "AP 0", " AP 1", " AP 2" and "SP" flash for about four
seconds.
▶ During these four seconds, press the "AP 0", " AP 1", " AP 2" or "SP" buttons
until you hear a beep.
The chair position is saved on the button.
Note
The automatic position "Last position" is saved on the "LP" button. Press the "LP"
button for the chair to automatically move to the last position before the rinsing
position. The "LP" button cannot be saved with another automatic position.
Save with foot control
① Spray preselection/AP footswitch ③ Foot pedal
② Blown air/AP footswitch
Instructions for use Globus 1078 S
4 Operation | 4.3 Adjusting the patient chair
40/75