KaVo ESTETICA E70 Vision, Care Instructions

Page: 34 / 48

Care instructions ESTETICA E70 Vision / E80 Vision
2 Setup methods according to ISO 17664 | 2.7 Automatic cleaning programmes
34 / 48
Workflow of the cleaning programmes "Morning" and
"Evening"
Set rinsing time
▶ Tap "Settings" to open the "Settings" menu.
▶ Then tap "General settings" followed by "Advanced settings".
▶
Scroll down until "Morning" and "Evening" are displayed.
▶
Use the slider bar to set the rinsing time for "Morning", "Evening" and "After
treatment".
ð
The default value for the cleaning programmes "After treatment" and "Even-
ing" is 20 seconds per instrument.
ð
The default value for the "Morning" cleaning programme is 2 minutes per in-
strument.
Note
The default value is based on the RKI guideline.
▶
Tap the corresponding button to start the cleaning programme "Morning" or
"Evening".
ð
The following message is displayed after completion of the cleaning pro-
gramme:
▶
After completion of the "Evening" cleaning programme, do not place hoses
in holders and switch off the treatment centre.
2.7.5 "Weekly" cleaning programme
Note
Observe the instructions for use for the instruments.
Note
If the suction hoses are attached in the hygiene centre, the "Evening" clean-
ing programme runs parallel to the "Weekly" cleaning programme.