KaVo ERGOcom 3, User Instructions

Page: 34 / 88

ERGOcom 3
5 Operation
|
5.2 Operation, no display interface (classic)
Note
If there is no input for 8 seconds, the
ERGOcom 3
switches back to operational
mode.
This saves the last setting on the status display.
5.2.5 Generate still
Prerequisite
● A video signal is shown on Display 1.
● The
ERGOcom 3
is connected to a PC fitted with a grabber card by means of a
USB cable.
● On this PC, the KaVo
Display Interface System
software is installed.
▶ Hold down the footswitch for < 2 seconds.
The Generate still command is passed on to the PC.
5.2.6 Save still
Prerequisite
● The
ERGOcom 3
is connected to a PC fitted with a grabber card by means of a
USB cable.
● On this PC, the KaVo
Display Interface System
software is installed.
▶ Hold down the footswitch for > 2 seconds.
The Generate still command is passed on to the PC.
33/56