KaVo ERGOcom 3, User Instructions

Page: 22 / 88

ERGOcom 3
4 Start-up
|
4.1 Start-up
▶ Select the required channel using navigation.
Note
If there is no input for 8 seconds, the
ERGOcom 3
switches back to operational
mode.
This saves the last setting on the status display.
Learn channel
The
ERGOremote
's radio code is synchronised with the channel configured
on
ERGOcom 3
.
▶ Hold down the Channel Selection button on
ERGOcom 3
for more than 2 se-
conds.
Learn Channel Mode appears on the status display.
Note
If the channels do not synchronise within approx. 30 seconds,
ERGOcom 3
swit-
ches back to operational mode.
▶ Hold down the Wake Up/Learn button on the
ERGOremote
for more than 3 se-
conds.
The green LED will be lit for 3 seconds to show that synchronisation is complete.
The green LED will flash to indicate that radio communication has not been set up.
4.1.3 Start-up, USB drive
The
ERGOcom 3
with a display interface (equivalent to comfort or excellence level)
has a built-in USB 2.0 drive. This drive shares volatile and non-volatile memory.
The non-volatile memory then retains the information when the
ERGOcom 3
is
switched off. The logos are stored here automatically.
The images are automatically stored in the volatile memory. When the
ERGOcom 3
is switched off, these images are deleted.
See also:
5.3.6 Generate still, Page 41
The images contain the following name syntax: Bildxx_y.bmp.
21/56