KaVo ERGOcom 3, User Instructions

Page: 21 / 88

ERGOcom 3
4 Start-up
|
4.1 Start-up
4 Start-up
4.1 Start-up
4.1.1 Start-up
CAUTION
Malfunction due to incorrect use
An increase in operating temperature due to poor ventilation can lead to malfunc-
tion or failure.
▶ Do not set up near to a heat source.
▶ Do not cover the product's vents. A minimum gap of 50 mm must be left in front
of and behind the unit.
▶ Operate the product only when it is horizontal.
▶ Connect the
ERGOcom 3
to a properly earthed power source that is protected by
a fuse.
4.1.2 Start-up, radio receiving
Select channel
Here, up to 38 channels can be set. A channel determines the assignment of a
specific
ERGOremote
to a specific
ERGOcom 3
.
Here, it is expedient to select a channel corresponding to the treatment room: e.g.
channel 1 is used for treatment room 1.
▶ Hold down the Channel Selection / Learn Channel Mode button for < 2 seconds.
The channel selected appears on the status display.
Note
If there is no input for 8 seconds, the
ERGOcom 3
switches back to operational
mode.
20/56