KAUO HENG
COMPUTERIZED FLAT KNITTING MACHINE
10. Cleaning
Maintenance: daily
a. Clean the yarn dust on the needle, sinker, yarn carrier, yarn carrier rail,
carriage, latch brush and top tension and clean the filter.
b. Clean up the needle bed daily and clean out the yarn dust on the needle
bed.
c. Clean out the yarn dust on the yarn carrier rail and oil the jack, select jack,
selector and both sides of the carriage.
Filter
d. Put on the cover. Cleaning Filter
：
Filters are equipped in the controller and
in the parts of main motor, it prohibits dust to come inside. Please take out
the filter and dust it off.
Fig.10.1
e. After unpacking and locating the machine in the factory, it must be leveled
carefully with a spirit-level to avoid machine distortion in running.
KH-300
OPERATION MANUAL
28
Where to oil
Interval
Carrier rails
Every 8 to 12 service hours
Carriage rails
Every 8 to 12 service hours
Carriage guide sliders ( front and
back )
Every 8 to 12 service hours
Needle bed ( front and back ),
jack, select jack, and selectors
Every 8 to 12 service hours
Inside of carriage
Every month
Ball screw unit
Every month
