KAUO HENG
COMPUTERIZED FLAT KNITTING MACHINE
7.4 Yarn feeder
The position of carrier is adjusted according to the desired knitting width,
correctly make yarn feeder beside the end working needle by 10 mm. The
yarn feeder must be in the central position between front and rear needles,
also check its height refer to Fig.7.4.1. When work several yarn feeder in
knitting, the position of carrier should be adjusted to make each yarn feeder
not be overlapped, it avoids damage of the parts. The yarn carrier on rail must
be adjusted in an easy movement, and adjustment refers to Fig.7.4.2.
Fig.7.4.1 Position of yarn feeder
KH-300
OPERATION MANUAL
11
Fig.7.4.2 Adjustment of carrier
高亨 精機
Loosen two screws to adjust up or down