KAUO HENG
COMPUTERIZED FLAT KNITTING MACHINE
KH-300
OPERATION MANUAL
67
ERROR MESSAGE TABLE
ERROR MESSAGE
SOLUTIOIN
Main Servo Error
：
Start servo-motor, green ON key,
Clear the error signal.
Shock
：
Check if needles in fault ,then
press R key after solution.
Yarn Breakage
：
Check if top-tension in fault, and
adjust to correct position.
Side Tension R/L
：
Check if side-tension in fault, and
adjust to correct position.
Needle Detector SYS - ? R/F
：
Check if detector in fault, and
adjust to correct position.
Drop Out
：
Check if fabric take 0down in fault,
and adjust to correct position.
Fabric Push Off
：
Check if the grip of roller tension
in push position.
Entanglement
：
Check if entanglement in fault,
and adjust to correct position.
Operation Bar in Start Position
：
Turn off power for 30 seconds,
then restart.
Piece Count
：
Press R key to clear error signal.
R/L Limit Position Error
：
Push moving carriage to opposite
direction.
Racking Servo Error
：
Turn off power for 30 seconds,
then restart.
Read Sensor Error
：
Turn off power for 30 seconds,
then restart.
Color Jacquard Program Position
：
Check if Edit Main Control or
Pattern Set in fault, and restart
Stop
：
Release the red emergency button
by turning .
