background image

The seller of the boiler must inform the customer about warranty 

conditions:

1. Manufacturer provides:

  

6-year

 warranty for boiler heat exchanger integrity

  

2-year

 warranty for other parts of the boiler 

  

2-year 

warranty for the rotational burner

Warranty does not include ceramic parts.

2. When performing rotational burner check-up after 2 years, 

rotational burner warranty can be extended to 

3 years

3. 

The connection to the central heating system must ensure 

the operating boiler temperature of at least 60°C.

4. The boiler must be installed by certified personnel.

5. The manufacturer must fix the boiler free of charge if the fault is 

caused by the manufacturers mistake.

6. 

In order for warranty to apply:

    Customer must provide documents of the purchase and singed 

warranty card.

    The boiler must have been installed and used according to the 

user manual.

    There is no visible mechanical damage.

    The boiler was not repaired by a third party.

    The boiler must not be damaged due to natural disaster.

7. If it is determined that the fault was a DUE to manufacturers 

mistake, the repair will be completed in 21 working days from 

receiving the notice.

8. If it is determined that the fault was NOT manufacturer caused, 

the customer covers the relevant expense.

UAB „Aukštaitijos katilai“

Linų g. 85, Ukmergė.

El. paštas: [email protected]

Telefono numeris:  +370 683 33388

www.akatilai.lt

MODEL 

PELEMAX

8. WARRANTY CONDITIONS

Summary of Contents for PELEMAX





























Reviews: